LumaSense Technologies 3434i SF6 Leak Detector - Manual (Page 124)

Chapter 10
______________________________________________________________________
_____________________________________________________________________________
BE6028-14 3434i SF6 Leak Detector LumaSense Technologies A/S
Page 124 of 191
SELECT TEXT LINE TERMINATOR The user chooses which
character the Monitor should use as “end of text line” when data is
transmitted from the Monitor.
10.5 Data Logging Function
Setting-up the Monitor to Print a Data Log
If the Monitor is connected up to a printer, and it is set-up to
transmit data to the printer, this function enables measurement data
to be printed out, automatically, as soon as it becomes available
during a measurement or calibration.
The procedure is as follows:
1 Press the following sequence: SET-UP S3 S1 S1, and the
following text is displayed:
SELECT GENERAL SET-UP BRANCH ?
CLOCK SOUND TESTS
2 Press S3 q S3 SET-UP. This activates the data logging
function.
10.6 Error Logging Function
Setting-up the Monitor to Print an Error Log
If the Monitor is connected up to a printer, and it is set-up to
transmit data to the printer, this function enables any warning or
error messages that are displayed, to be recorded in the printed
error log, automatically.
The procedure is as follows:
1. Press the following sequence: SET-UP S3 S1 S1, and the
following text is displayed:
SELECT GENERAL SET-UP BRANCH ?
CLOCK SOUND TESTS
2. Press S3 q q S3 SET-UP. This activates the error logging
function.