LumaSense Technologies 3434i SF6 Leak Detector - Manual (Page 25)

Chapter 2
______________________________________________________________________
_____________________________________________________________________________
BE6028-14 3434i SF6 Leak Detector LumaSense Technologies A/S
Page 25 of 191
The following text is displayed.
1. Press S1 “CHANGE USER LEVEL”
The following text appears.
2. Press
¿ .
3. Enter the current Password using the ▲ and ▼ keys.
4. Press ¿ .
The following text appears.
5. Press
¿ .
6. Use the ▲ and ▼ keys to change the User level.
7. Press ¿ .
8. Press the Lock function push button to exit.
2.7 Restoring of calibration data
If you have ordered a calibration from our calibration laboratory, you
will receive a CD with a backup of the calibration data. It is very
important that you store these data in your Calibration Software
BZ7002. Please store the data before using the Gas Monitor. Please
refer to the User Manual BE6034 regarding this procedure.
ENTER PASSWORD "*****"
PRESS ENTER TO CHANGE VALUE
CURRENT USER LEVEL IS X
CHANGE USER LEVEL CHANGE PASSWORD
CURRENT USER LEVEL IS X
PRESS ENTER TO CHANGE VALUE