LumaSense Technologies 3434i SF6 Leak Detector - Manual (Page 114)

Chapter 9
______________________________________________________________________
_____________________________________________________________________________
BE6028-14 3434i SF6 Leak Detector LumaSense Technologies A/S
Page 114 of 191
9.3.3 Deleting Data from Background Memory
To delete data which has been stored in Background Memory:
Press MEMORY S3.
Use the direction keys to select the location number. After selecting
the chosen location number the display will show the starting-time of
the oldest data stored in the Background Memory:
If the starting-time of the oldest stored data to be deleted
corresponds with the starting-time shown on the display screen then
press S1 and then S2 to accept that the data will be deleted from
Background Memory.
9.3.4 Obtaining Information in Memory Mode
It is not necessary for the user to remember the numbers of the
locations in Background Memory which have been used to store data.
When the Monitor is operated in Memory mode, users can at any
time find out which locations are used, and what percentage of the
Background Memory’s total data capacity has been used by:
Pressing the INFO push-button:
The numbers appearing on the above display are those, which
contain stored data. The Monitor will show the above “Information
text” display for a short period of time and then automatically change
back to the text, which was showing on the display before the INFO
push-button was pressed
LOCATION NUMBER 1
PRESS ENTER TO CHANGE VALUE
LOCATION(S) USED : 1 - -3 –4 -5 -7 -9 -10
53 % OF MEMORY USED TIME 10 : 26