Brocade MLX Series and NetIron Family (Supporting Multi-Service IronWare R05.6.xx) - Manual (Page 9)

Brocade MLX Series and NetIron Family Documentation Updates 1
53-1003301-07
Chapter
1
Documentation Updates for the Multi-Service IronWare
Configuration Guides
In this chapter
The updates in this chapter are for the following Multi-Service IronWare R05.6.00 Configuration
Guides.
• Multi-Service Ironware Switching Configuration Guide - publication number 53-1003036-03
• Multi-Service Ironware Security Configuration Guide - publication number 53-1003035-03
The following features were added or modified as part of the 5.6.00a release.
• “Configuring a “null” route” on page 3
• “ACL deny logging” on page 3
• “Deployment Scenarios and CLI Configuration” on page 4
• “Telemetry Solutions” on page 5
• “PIM over MCT” on page 9
• “Multicast snooping over MCT” on page 9
The following features were added or modified as part of the 5.6.00b release.
• “HQoS Feature support” on page 13
• “HQoS for VPLS traffic overview” on page 13
• “HQoS for LAG traffic overview” on page 15
• “WRED support for HQoS” on page 16
• “Configuring VPLS endpoint over FDP/CDP interface” on page 18
• “Configuring VLL endpoint over FDP/CDP enabled interface” on page 19
• “Transparent forwarding of L2 and L3 protocols on a VLL for CES and CER” on page 20
The following features were added or modified as part of the 5.6.00c release.
• “Modify OSPF standard compliance setting” on page 21
• “VRRP and VRRP-E” on page 21
• “Configuring an IPv6 Access Control List” on page 22
• “Start a log file before an upgrade” on page 23
• “IPv6 packets on Openflow L23 port” on page 24
• “TM RAS Enhancements” on page 25
• “Simplified Package Upgrade” on page 29
• “LP auto-upgrade” on page 30
• “SCP “success message”” on page 30
• “L2 protocol packet handling” on page 31