Brocade MLX Series and NetIron Family (Supporting Multi-Service IronWare R05.6.xx) - Manual (Page 44)

36 Brocade MLX Series and NetIron Family Documentation Updates
53-1003301-07
Optional cluster operation features
1
Brocade(config)# sh cam l2acl 2/1
LP Index VLAN Src MAC Dest MAC Port Action PRAM
(Hex) Hex)
2 0a3800 10 0000.0000.0000 0000.0000.0000 0 Pass 0009c
2 0a3802 0 0000.0000.0000 0000.0000.0000 0 Drop 0009d
Brocade(config)#
Brocade(config)#no mac acc SampleACL
Brocade(config)#sh cam l2acl 2/1
LP Index VLAN Src MAC Dest MAC Port Action PRAM
(Hex) (Hex)
Brocade(config)#show access-list all ACL configuration:
!
Brocade(config)#show access-list bindings
L4 configuration:
!
interface ethe 2/1 mac access-group SampleACL in
!
Brocade(config)#
Optional cluster operation features
The following content has been modified in the Multi-Chassis Trunking (MCT) chapter of the
Multi-Service Ironware Switching Configuration Guide. The update is part of the “Client interfaces
delay” section.
The default value for delay is 90 seconds. The acceptable values range between 20 and 1800
seconds.
Enabling a transparent firewall
The following note has been added to the VLANS chapter of the Multi-Service Ironware Switching
Configuration Guide. The update is part of the “Transparent firewall mode” section.
NOTE
Transparent firewall mode is available only on the Brocade NetIron CES and Brocade NetIron CER
devices.
To set the mode to transparent, enter a command such as the following.
Brocade(config-vlan-10)# transparent-fw-mode
To set the mode to routed, enter a command such as the following.
Brocade (config-vlan-10)# no transparent-fw-mode
Syntax: [no] transparent-fw-mode
Transparent firewall mode is available only on the Brocade NetIron CES and Brocade NetIron CER
devices