Brocade Flow Vision Administrators Guide (Supporting Fabric OS v7.3.0) - Manual (Page 70)

----------------------------------------------------------------------------------------------------
| 10000| 75.84M | 482.95k | 1568G | 14.47M | 2080 |
| 15000| 37.42M | 241.47k | 784.4G | 50.23M | 2080 |
| 15100| 37.42M | 241.47k | 784.4G | 50.23M | 2080 |
----------------------------------------------------------------------------------------------------
| * | 1.50G | 965.90k | 3137G | 1.15G | 2080 |
----------------------------------------------------------------------------------------------------
Commands related to Flow Generator
The following commands affect or are affected by Flow Generator. Refer to the Fabric OS Command
Reference for more detailed information.
portcfgshow
Entering portcfgshow for a specified port shows the configuration of the SIM port. (Called out for
illustration.)
switch:admin>portcfgshow 8/0
Area Number: 96
Octet Speed Combo: 1(16G|8G|4G|2G)
Speed Level: AUTO(SW)
AL_PA Offset 13: OFF
. . . . .
Mirror Port OFF
SIM Port ON <-- SIM Port status
Credit Recovery ON
F_Port Buffers 48
. . . . .
Compression: OFF
Encryption: OFF
FEC: ON
portperfshow
When you run the portperfshow command, an asterisk (*) represents traffic running on either an
ingress port or an egress port from a Flow Generator flow. For the portperfshow command, the
Transmit Throughput value represents the egress port, and the Receive Throughput value represents
the ingress port.
portstatsclear
Entering portstatsclear for a port clears the Flow Generator frame count for all flows sharing this port.
This is equivalent to the flow --reset command. Refer to
Resetting flow statistics on page 29 for
details.
portstatsshow
When you run the portstatsshow command, the Transmit Word Count value represents the egress
port, and the Receive Word Count value represents the ingress port. The frame size used for
portstatsshow is 2048 bytes, regardless of what value has been set for the flow.
slotstatsclear
Entering slotstatsclear for a slot clears the Flow Generator frame count for all flows sharing the ports
on that slot.
Commands related to Flow Generator
70 Flow Vision Administrators Guide
53-1003168-01