Brocade Flow Vision Administrators Guide (Supporting Fabric OS v7.3.0) User Manual

Page 24

Repeating a Flow Generator flow

The following example creates a Flow Generator flow named “simflow_1”, and
then repeats the output three times:

switch:admin> flow --create simflow_1 -feature generator -srcdev 07f000 -dstdev 371400 -ingrport 12/16

switch:admin> flow --show simflow_1 -feature generator -count 3

=======================================================================================================

Name : simflow_1 Features: gen(Activated),mon(Activated) noConfig: Off

Definition: IngrPort(12/16),SrcDev(0x07f000),DstDev(0x371400)

Flow Generator (Activated):

-----------------------

| SrcDev | DstDev |

-----------------------

| 0x07f000 | 0x371400 |

-----------------------

Number of frames generated from IngrPort : 2.57G

=======================================================================================================

Name : simflow_1 Features: gen(Activated),mon(Activated) noConfig: Off

Definition: IngrPort(12/16),SrcDev(0x07f000),DstDev(0x371400)

Flow Generator (Activated):

-----------------------

| SrcDev | DstDev |

-----------------------

| 0x07f000 | 0x371400 |

-----------------------

Number of frames generated from IngrPort : 2.57G

=======================================================================================================

Name : simflow_1 Features: gen(Activated),mon(Activated) noConfig: Off

Definition: IngrPort(12/16),SrcDev(0x07f000),DstDev(0x371400)

Flow Generator (Activated):

-----------------------

| SrcDev | DstDev |

-----------------------

| 0x07f000 | 0x371400 |

-----------------------

Number of frames generated from IngrPort : 2.58G

=======================================================================================================

Flow Vision

Flow Vision Administrators Guide

53-1003168-01