Numbers of flows supported – Brocade Flow Vision Administrators Guide (Supporting Fabric OS v7.3.0) User Manual
Page 20

Supported frametype parameters (Continued)
TABLE 5
Frametype
parameter
Frames counted
scsiwrite
Only SCSI write command frames
scsirw
Both SCSI read and write command frames
scsi2reserve
Only SCSI 2 reserve command frames
scsi3reserve
Only SCSI 3 reserve command frames
scsi2release
Only SCSI 2 release command frames
scsi3release
Only SCSI 3 release command frames
scsi2reserverelease
Only SCSI 2 reserve-release command frames
scsi3reserverelease
Only SCSI 3 reserve-release command frames
scsitur
Only SCSI test unit ready frames
scsistatus
Only SCSI status frames
scsicmdsts
Only SCSI command status frames
NOTE
This parameter is valid only for Flow Mirror. It implicitly assumes “-bidir” and looks for both
SCSI command and status frames.
scsigoodstatus
Only SCSI status frames with status marked as good (all 0s [zeros] in the status byte)
scsicheckstatus
Only SCSI status frames with check status (Check Condition, Busy, Reservation Conflict,
Task Full Set)
scsiinquiry
Only SCSI inquiry frames
scsiresvconflict
Only SCSI status frames with reservation conflict set
scsixferrdy
Only SCSI FCP XFER_RDY (transfer ready) frames
Numbers of flows supported
On chassis-based platforms, Flow Vision supports a maximum of 512 user-defined flows plus an
additional 512 learned flows and predefined flows. On fixed-port platforms, Flow Vision supports a
maximum of 128 user-defined flows plus an additional 128 learned flows and predefined flows.
However, there is a combined limit for all features of 64 static flows and learning flows (whether active
or inactive) for any one port, and a maximum of 64 learned flows per feature per port. This means (as
an example) that two different learning flows on a given port can each have 64 learned flows.
Beyond these limits, there are limits for each individual feature, as described in the following table. In
addition, refer to the individual features for other feature-specific restrictions.
Numbers of flows supported
20
Flow Vision Administrators Guide
53-1003168-01