Yokogawa PR300 Power and Energy Meter - Manual (Page 69)

A-12 IM 77C01E01-01E
Appendix 4 Parameter List
Parameter
Symbol
Display
Order
Parameter Name MEMO
Setting
Type
Setting Range (Details)
Initial Value
(Factory-
set Value)
1
2
3
4
4-1
4-2
4-3
4-4
4-5
4-6
5
5-1
5-2
5-3
5-4
5-5
5-6
5-7
1.00
1
0.05
*1 Only the PR300 with the Ethernet communication function can be selected. *2 Select "8" if you selected Modbus/RTU for the protocol.
*3 Select NONE for Parity, 1 bit for Stop bit, and 8 bits for Data length if you have selected PR201 original for the protocol option.
192
168
1
255
255
255
1
Menu to shift to the parameters of
Ethernet communication
VT ratio
CT ratio
Integrated low-cut power
RS-485 communication menu
Station number
1 to 6000
0.05 to 32000
0.05 to 20.00 (%)
Menu to shift to the parameters of
RS-485 communication
1 to 99
0 to 255
0 to 255
0 to 255
0 to 255
0 to 255
0 to 255
0 to 255
PC link without checksum
PC link with checksum
Modbus/ASCII
Modbus/RTU
PR201 original
Modbus/TCP (*1)
2400 bps
9600 bps
19200 bps
NONE
EVEN
ODD
1 bit
2 bits
8 bits
7 bits
Protocol
Baud rate
Parity (*3)
Stop bit (*3)
Data length (*2) (*3)
Ethernet communication menu
(Displayed only for a PR300 with the
Ethernet communication function.)
IP address-1
IP address-2
IP address-3
IP address-4
Subnet mask-1
Subnet mask-2
Subnet mask-3
Integral
numeric
value
Floating-point
numeric
value
Fixed-point
numeric
value
Integral
numeric
value
Selection
Selection
Selection
Selection
Selection
Integral
numeric
value
Integral
numeric
value
1
PC link
with
checksum
9600 bps
NONE
1
8