Yokogawa PR300 Power and Energy Meter - Manual (Page 38)

Parameter Setting Operations
3-17 IM 77C01E01-01E
1
2
3
4
5
A
I
3.9 Setting the Measured Value Display Pattern
Display Pattern-1 Upper
Display screen
Display Pattern-1 Middle
Display screen
Refer to steps
8, 9
and
10
to also set other display
patterns.
11
Display Pattern-1 Lower
Display screen
To return to the Display Setting
Menu screen, press .
The parameter
(display pattern-1 middle
display) appears.
Press once.
The setpoint is confirmed and the PR300
returns to the Display Pattern-1 Upper
Display screen.
Display pattern-1 upper display
setting completed.
To return to the Measured Value
screen, hold down .
If you do not operate any key for more
than 5 minutes on the Parameter
screen, the PR300 automatically
returns to the Measured Value screen.
Parameter Setting Types and Ranges
Display setting menu
Number of display patterns
Display pattern-1 upper display
Display pattern-1 middle display
Display pattern-1 lower display
Display pattern-2 upper display
Display pattern-2 middle display
Display pattern-2 lower display
Display pattern-3 upper display
Display pattern-3 middle display
Display pattern-3 lower display
Display pattern-4 upper display
Display pattern-4 middle display
Display pattern-4 lower display
Integral
numeric
value
Selection
Selection
Selection
Selection
1 to 8
A measurement item can be selected from the
following:
None
Active energy
Regenerative energy
LEAD reactive energy
LAG reactive energy
Apparent energy
Active power
Reactive power
Apparent power
Voltage (phase switch inidication)
Voltage-1
Voltage-2
Voltage-3
Current (phase switch inidication)
Current-1
Current-2
Current-3
Power factor
Frequency
Optional active energy
Demand value
Maximum demand value
1
Voltage
(phase switch
inidication)
Active power
Active power
Reactive power
Power factor
Active energy
LEAD reactive
energy
Apparent
energy
Current
(phase switch
inidication)
Current-2
Current-3
Current-1
- Continued to next page -
Menu to shift to the parameters of
display setting
Parameter Symbol Parameter Name
Setting
Type
Setting Range (Details)
Initial Value
(Factory-set
Value)