Yokogawa PR300 Power and Energy Meter - Manual (Page 67)

A-10 IM 77C01E01-01E
Appendix 3 Parameter Map
Some of the following parameters cannot be displayed due to the specifications of the PR300.
To move to the previous or
next step in the procedure
indicated by the dotted line,
use the following keys:
Go to the
next screen
Go to the
previous screen
Startup screen
Power ON
Hold down for
at least 3 seconds.
Hold down for
at least 3 seconds.
Hold
down for
at least
3 seconds.
Hold down for
at least 3 seconds.
When there are
no changes to
the specifications
2
1
3
4
5
4-1
4-2
4-3
4-4
4-5
4-6
Measured Value screen
Parameter screen
Specification Change
Confirmation screen
Display pattern-1 Display pattern-2
Display pattern-n
(a maximum of 8 patterns)
+