Yokogawa Standalone MW100 - Manual (Page 33)

IM MW100-0E
Changing the Display Using the Display Setup Window
See the explanation in the figure below. Change the display settings and click OK.
Set the display for each display group.
Select the Y-axis
display format
Switch to another display group
Select channels (displays the channel selection dialog box)
Group name
Display ON/OFF
Select the Y-axis type (linear/logarithmic)
Turn Y-axis ON/OFF when displaying multi-axes zone
Maximum and minimum
values of the scale
Turn ON/OFF the trip point display
Trip point value
Channel display color
Display zone position
Click to display the flag to
select it for copying/pasting,
or click to hide the flag to
deselect it.
Numerical Display
While the waveform display window is displayed, click the button on the toolbar or
select Window > Numerical Display to display a numerical value window as in the figure
below. If there are groups with differing monitor intervals, the screen is split.
Date/Time
Switch the display
group
Alarm
Channel display color
Value Data number
Active channel (Y-axis displayed
on the waveform display)
Mark
indication
Horizontal scroll
Display per record interval
Viewing Measured Data on the Viewer Software