Yokogawa Standalone MW100 - Manual (Page 30)

0
IM MW100-0E
• Overview Display
Alarms (status and type) and measured values are displayed as numerical values
in the monitor display screen. Skipped channels are not displayed. If the size of the
window is reduced, only the alarms are displayed.
Starting Recording
4. Click the Record Start button in the screen display.
Saving of data to the CF card begins.
Click to start recording.
Stopping Recording
5. Click the Record Stop button in the screen display.
Click to stop recording.
Transferring Measured Data to the FTP Server
1. From the browser top screen, choose Communication Setting > FTP Client
Setting. The FTP client settings screen opens.
2 . Set the items such as
the FTP server name.
3 . Click here. The settings are changed.
4. Start the measurement and then start the recording. (For the procedure to start
the measurement and recording, see page 25 in this manual.)
When a file is created, the file is transferred to the folder on the specified FTP server.
Viewing Measured Data on the Monitor Screen and Starting/Stopping Recording