Yokogawa Standalone MW100 - Manual (Page 21)

1
IM MW100-0E
Alarm and Relay Settings
1. From the browser top screen, click Channel Setting > Alarm Setting (AI/DI).
The alarm setting screen in displayed.
2 . Select the channel range
you wish to set in the list.
. Select the alarm type, then enter the alarm value and hysteresis.
For details on alarm setting items, see the MW100 Data Acquisition Unit User’s Manual (IM
MW100-01E), section 1.3.
4 . Click here.
The alarm settings are changed.
5. After choosing Channel Setting in step 4, click DO Channel Setting.
The relay setting screen in displayed. For details, see the MW100 Data Acquisition Unit
User’s Manual (IM MW100-01E), sections 3.7 and 3.8.
6 . Click the channel range for which you
wish to set relays.
7 . Enter or select each item.
For details on relays, see the MW100
Data Acquisition Unit User’s Manual
(IM MW100-01E), section 1.12.
8 . Click here.
The relay settings are changed.
Entering Settings on the MW100 Using a Browser