Yokogawa Standalone MW100 - Manual (Page 22)

IM MW100-0E
Changing Monitor Screen Display Conditions
Stop measurement, then change the display method.
After changing the display method, start measurement and display the monitor screen.
The screen is updated according to the new settings. For details on display settings, see
the MW100 Data Acquisition Unit User’s Manual (IM MW100-01E), section 3.15.
Tag Settings
1. From the browser top screen, choose Display Setting > Channel Tag Setting.
The tag setting screen in displayed.
2 . Click here to select the setting range for the
tags you wish to set.
3 . Enter the tag name.
(If no name is entered,
the channel number is
displayed.)
4 . Click here.
The tag name setting is changed.
Tag name (Channel number)
5. After choosing Display Setting in step 4, click Other Settings.
7 . Click here.
6 . Click here to select the
Tag Name.
Setting Messages
1. From the browser top screen, choose Display Setting > Message Setting.
The message setting screen in displayed.
2 . Enter a message.
3 . Click here.
The message setting is changed.
Operation in the browser’s monitor screen
1 . Select a message (Free, or 1 to 5).
2 . If you select Free, enter characters (up to 15 alphanumerics).
3 . Click here.
The selected message is displayed on the
monitor screen.