Connecting the main module to a pc, Ethernet connection – Yokogawa Standalone MW100 User Manual
Page 15
15
IM MW100-0E
Connecting the Main Module to a PC
Ethernet Connection
Setting the IP Address
Because the IP address is not set by factory default, set the IP address first.
1.
After opening an Ethernet connection between the MW100 and PC, run the
MW100 Viewer Software CD-ROM or the IP address setting software installed on
the PC.
2
. Click here.
The MW100 information is displayed.
4
. Click here.
Setting changes
are enabled.
Address Setting Screen
3
. Click here.
Information appears in the address
setting screen.
Note
If your OS is Windows XP, Windows Vista, or Windows 7 and the firewall is enabled, it may not
be recognized even if you click the Search button. To solve the problem, see appendix 1, in
the MW100 Viewer Software User’s Manual (this phenomenon may also occur with some third
party anti-virus programs).
- EJA120A (31 pages)
- EJA130A (47 pages)
- EJA120A (40 pages)
- EJA438 (5 pages)
- EJA120A (6 pages)
- EJA115 (85 pages)
- EJA120A (47 pages)
- EJA120A (79 pages)
- EJA130A (2 pages)
- EJA130A (4 pages)
- EJA210A (70 pages)
- EJA130A (4 pages)
- EJA430A (78 pages)
- EJA210E (9 pages)
- EJX115A (55 pages)
- EJA210E (41 pages)
- EJA210E (96 pages)
- EJA210E (52 pages)
- EJA210E (89 pages)
- EJA210E (170 pages)
- EJX120A (4 pages)
- EJX910A (55 pages)
- EJX910A (175 pages)
- EJX910A (83 pages)
- EJX910A (9 pages)
- EJX910A (103 pages)
- FlowNavigator Software (163 pages)
- EJA530A (67 pages)
- EJA120A (83 pages)
- EJX530A (52 pages)
- EJA110E (4 pages)
- EJA110E (85 pages)
- EJX120A (85 pages)
- EJA118 (76 pages)
- EJX118A (64 pages)
- EJA438 (72 pages)
- EJA430E (85 pages)
- EJA430E (7 pages)
- EJX430A (6 pages)
- EJX430A (40 pages)
- EJX430A (76 pages)
- EJA430E (41 pages)
- EJA430E (96 pages)
- EJX438A (10 pages)
- ADMAG AXR (194 pages)