Yokogawa Standalone MW100 - Manual (Page 19)

1
IM MW100-0E
Settings for Recording to CF Card
1. From the browser top screen, click System Setting > Recording Setting.
The recording operation setting screen in displayed.
2 . Click here, then select the save start operation.
3 . Click here to select the type of recording.
4 . Click to select the recording interval.
Set an integer multiple of the
measurement interval.
5 . Select the data length.
6 . Select a trigger length if data is to be
saved upon activation of the trigger.
Specify a pretrigger length as a
percentage of the data length.
7 . Click to select the time remaining for activating
the media alarm.
8 . Click here.
The settings are changed.
Recording Channel Settings
1. From the browser top screen, click Channel Setting > Recording Channel Setting.
The recording channel setup screen appears.
2 . Click here to select the recording
channel range.
3 . Click here to select to record (On) or not
to record (Off).
4 . Click here.
The settings are changed.
For information on thinning recording and Manual
Sample, see the MW100 Data Acquisition Unit
User’s Manual (IM MW100-01E). Thinning recording
(section 3.4), Manual Sample (section 1.3)
Entering Settings on the MW100 Using a Browser