Yokogawa Standalone MW100 - Manual (Page 16)

1
IM MW100-0E
5. Make entries in the address setting screen.
The following is an example of editing such entries.
Host name: mw100user
Specify IP address: 192.168.1.100
Subnet mask:
255.255.255.0
Default gateway: 192.168.1.1
Specify a DNS server
Primary DNS server:
192.168.1.101
Secondary DNS server: 192.168.1.102
Specify a domain suffix
Primary domain suffix: daqmaster1.com
Secondary domain suffix: daqmaster2.com
In this example, the PC and the MW100 can communicate when, for example,
the PC has an IP address of 192.168.1.10 and a subnet mask of 255.255.255.0.
6 . Click here.
The edited items are applied to the MW100.
Connecting with a Browser
7. Connect an Ethernet cable between the MW100 and PC, then start the browser.
. Enter the IP address of the MW100 in the browser’s URL/Address box.
Ex. Specifying the IP address using the browser
The MW100 top screen appears. From the browser, you can change MW100 settings, or
acquire/record data.
Connecting the Main Module to a PC