Flow of operations during installation – Yokogawa Standalone MW100 User Manual
Page 13
1
IM MW100-0E
Flow of Operations during Installation
The figure below shows the general flow of operation when the MX100 is installed
initially.
Wire the input/output
modules
Operations on the MW100
Operations on the PC
Connect the
network cable
Connect the
power cable
Turn ON the
power switch
Connecting the
MW100 to a PC
Changing settings on the
MW100 using a browser
Enter data acquisition
conditions
Start measurement
Monitor measured data
Start recording
Data transfer
Stop recording
Stop measurement
Change the display
conditions
Display recorded data
on the Viewer
Install the MW100
See the Installation
and Connection Guide
*
.
See the Installation
and Connection Guide
*
.
Page 14
See the Installation
and Connection Guide
*
.
See the Installation
and Connection Guide
*
.
Page 15
Page 17
Page 18
Page 22
Page 25
Page 26
Page 30
Page 26
Page 26
Page 31
Page 27
This operation guide and the installation and
connection guide are introductory manuals.
They do not cover all functions and operating
procedures. They also do not cover the details
of the precautions and limitations of usage.
For a detailed explanation, see the following
electronic manuals contained in the manual
CD-ROM.
• For MW100 functions, installation, wiring,
and handling procedures:
MW100 Data Acquisition Unit User’s Manual
(IM MW100-01E)
• For functions and operating procedures of
the MW100 Viewer software:
MW100 Viewer Software User’s Manual
(Model MW180-01E)
Set the input mode,
measuring range,
measurement span, etc.
Tag, display scale,
display color,
display groups,
and other settings
Display data being
measured in the
browser screen
Change the IP address
Connect with a fixed IP address
Login function
Module recognition
Reconfiguration
Time settings
Display data saved on the CF
card in the Viewer, and execute
computation of statistics over
and area, data format
conversions, and other
processes.
* MX100/MW100 Data Acquisition Unit
Installation and Connection Guide
(IM MX100-72E)
Introduction to Functions