Yokogawa Standalone MW100 - Manual (Page 25)

5
IM MW100-0E
Starting and Stopping Measurement and Recording
To start and stop measurement and recording, you can use the keys on the MW100 Main
Module, or use the browser.
DATA ACQUISITION UNIT
MEASURE
RECORD
SERIAL RD
ETHERNET
10BASE - T
100BASE - TX
START
100 - 240V AC
STOP
USER 2 USER 1
POWER
SW ON
1 2 8 7 6 5 4 3
MATH
ALARM
ON OFF
SERIAL COMM
FG SDB SDA RDB RDA SG
70VA MAX 50 / 60Hz
RECORD
MEASURE
MATH
ALARM
SERIAL RD
Start/stop measurement
7-segment LED
Displays the operational status of
the MW100.
Status indicators
Illuminate in the following situations
• Using the Keys
• Using a Browser
Start/stop recording
Measuring
Recording (illuminates), recording stop processing (blinking)
Receiving serial communications data
Alarm activation or alarm hold
Computing (illuminates), computing stop processing (blinking)
Start/Stop keys
Start and stop measurement,
computation, and recording.
Starting Measurement
1. Check whether the instrument is measuring or recording by looking at the MW100
main module’s status lamp, or the browser’s top screen.
. Briefly press the MW100 main module’s START key, or select Start in the
Operation list under Measurement in the browser top screen’s Status table.
Measurement begins.