Yokogawa Standalone MW100 - Manual (Page 18)

1
IM MW100-0E
Checking Free Space on the CF Card and Initializing
. After choosing System Setting in step 5, click System Information.
The amount of free space on the CF card is shown under Media Information.
7 . To initialize the CF card, click here, then click the Initialize
button.
Measurement Groups and Measurement Module Settings
1. From the browser top screen, click System Setting > Measurement Setting.
The measurement operation setting screen in displayed.
2 . Click to select the measuring interval.
3 . Click to select measurement groups of the
measurement intervals above for the input
modules.
4 . Click here, then select the integral time from
the list.
If an output module is connected, or if a module
is not connected, it is not displayed.
5 . Click here.
The settings are changed.
Note
• The Interval Group that is assigned to the measurement group number is set as:
(interval is short) Interval group1 ≤ Interval group2 ≤ Interval group 3 (interval is long)
• The equivalent of three modules worth of settings are entered for the 30-CH Medium Speed
DCV/TC/DI Input Module.
• Select the same measurement group for the three measurement groups.
• Select the same integral time for the three A/D integral times.
Entering Settings on the MW100 Using a Browser