Yokogawa EJX930A - Manual (Page 82)

<4. Diagnostics>
4-32
IM 01C25R02-01E
Integral
Indicator
HART
configuration
tool display
Device
Status
Extended
Device Status
Value and Status (Data Quality and Limit Status)
Flow
Differential
Pressure
(DP)
Static
Pressure
(SP)
External
Temperature
(ET)
Total Flow % range
Loop
current
AL.91
F. SIM
F Simulate
Mode
In the case
of PV:
Loop
Current
Fixed
Device
Variable Alert
(0x02)
Value and
Status:
Flow
simulation
value
Same as Value and
Status of PV
AL.91
P. SIM
P Simulate
Mode
(0x08) Value and
Status:
Pressure
simulation
value
Value: Measured value
Status: Good and Not Limited
AL.91
SP.SIM
SP Simulate
Mode
Value and
Status:
Static
Pressure
simulation
value
AL.91
ET.SIM
ET Simulate
Mode
Value: Measured value
Status: Good and Not Limited
Value and
Status:
Temperature
simulation
value
AL.91
TF.SIM
TF Simulate
Mode
--- Value and
Status:
Total Flow
simulation
value
Value: Measured
value
Status: Good and Not
Limited
AL.91
PCT. SIM
% Simulate
Mode
Loop
Current
Fixed
(0x08)
Device
Variable Alert
(0x02)
Value: Measured value
Status: Good and Not Limited
Value and Status:
Simulation value (%)
AL.91
AO.SIM
AO
Simulate
Mode
Value and Status:
Simulation value (mA)
*1: Depend on the setting of hardware switch
*2: Depend on the direction of range over (high or low)