Watlow Series 922 - Manual (Page 61)

How To Program the Series 922, Chapter 6 WATLOW Series 922 User's Manual
61
One of six step types under the PROGRAM menu of the Series 922
that can be programmed to automatically start at a determined real
time. The AUTOSTART function is dependent on the three parameter
settings below ... DAY, HOUR and MIN. If there is a loss of power to
the Series 922, the real time clock is also lost, and any programs
dependent on time is incorrect.
Represents the number of days that the 922 waits until AUTOSTART
takes place. Each time 00:00 is achieved, one day has gone by. If
left blank (unprogrammed) the day count is ignored for use as a daily
event rather than weekly.
Range: 0 to 6 days
Default: Unprogrammed
Stands for the hour that the 922 waits for the time-of-day clock
before AUTOSTART takes place. Under the AUTOSTART step-type.
Range: 0 to 23 hours
Default: Unprogrammed
This parameter represents the minutes that the 922 waits for on the
time-of-day clock before AUTOSTART takes place. Under the
AUTOSTART step-type.
Range: 0 to 59 minutes
Default: Unprogrammed
From RETURN, you can go back to the SYSTEM prompt by pressing
the ENTER key, or return to FILE? by pressing MODE.
One of six step types under the PROGRAM menu of the Series 922,
that indicates the end of any file.
From RETURN, you can go back to the SYSTEM prompt by pressing
the ENTER key, or return to FILE? by pressing MODE.
One of six step types under the PROGRAM menu of the Series 922
that allows you to link one file to another.
Enter the number of the file that you want to link to from here.
Range: 1 to 10
Default: 1
From RETURN, you can go back to the SYSTEM prompt by pressing
the ENTER key, or return to FILE? by pressing MODE.
A wait for event input represented by a switch closure or opening, at
which the 922 continues the program This is not a voltage or current
input.
Range: OPEN or CLSE
Default: Unprogrammed
From RETURN, you can go back to the SYSTEM prompt by pressing
the ENTER key, or return to FILE? by pressing MODE.
PROGRAM Menu
RETURN
WE ( )
AUTOSTART
DAY ( )
HOUR ( )
MIN ( )
RETURN
RETURN
STOP
LINK
RETURN
FILE ( )