Watlow Series 922 - Manual (Page 2)

2
WATLOW Series 922 User's Manual
Notes, Cautions, and Warnings
We use note, caution, and warning symbols throughout this book to draw your
attention to important operational and safety information.
A bold text "NOTE" marks a short message in the margin to alert you to an
important detail.
A bold text "CAUTION" safety alert appears with information that is important for
protecting your equipment and performance. Be especially careful to read and
follow all cautions that apply to your application.
A bold text "WARNING" safety alert appears with information that is important
for protecting you, others, and equipment from damage. Pay very close
attention to all warnings that apply to your application.
The symbol (exclamation point in a triangle) precedes a general CAUTION or
WARNING statement.
The S ymbol (a lighting bolt with an arrowhead in a triangle) precedes an
electric shock hazard CAUTION or WARNING safety statement.
Comments and Suggestions
Y our comments or suggestions on this manual are welcome, please send them
to: Technical Writer, Watlow Controls, 1241 Bundy Blvd., P.O. Box 5580,
Winona, MN 55987-5580, or phone 507/454-5300. The Watlow Series 922
User's Manual and integral software are copyrighted by Watlow Winona, Inc., ©
1988 with all rights reserved.
This manual will make your job easier. Reading it and applying the
information is a good way to become familiar with the Series 922. Here's an
overview:
Introduction, Chapter 1.
Keys and Displays, Chapter 2.
Sample Program, Chapter 3.
Installation and Wiring, Chapter 4.
How to Tune, Chapter 5.
How to Program, Chapter 6.
How to Use Alarms, Chapter 7.
Specifications
Glossary
Calibration
Warranty
Series 922 error codes and prompts, see Pages 87 - 89.
Use The Manual
First…
Starting Out
Front Panel
Running a Program
Install/Wire
Tune
Programming
Alarms
Appendix