Watlow ANASCAN - Manual (Page 54)

46 ANASCAN User’s Guide
VIEW ALARMS
Function Keys
Alarm Screen Auto Switch
If you set the Auto Switch On in the System Parameters menu, the
Alarm screen appears automatically for each new latched alarm. You
will be asked to acknowledge each alarm. After doing that you can press
Esc to return to the last screen displayed before the alarm condition
occurred.
Acknowledging the alarms from View Alarms screen also
acknowledges the alarms at the controller. Acknowledging the alarms at
the controllers will acknowledge the alarms on the View Alarms screen.
Audible Alarm
If you set the Audible Alarm On in the System Parameters menu, the
computer emits an audible warning for each new alarm. Press Enter to
silence this alarm.
Key Function
F1 Clear log. Press after all alarms are acknowledged.
F10 Resets Latched alarms by channel number.
ESC Return to Overview screen.