Watlow ANASCAN - Manual (Page 46)

38 ANASCAN User’s Guide
SYSTEM SETUP
System Start Up
This window allows you to set the two start up conditions:
• Normal start-up
• Power failure recovery:
under time limit
over time limit
For each of these conditions, you can select one of three start up actions:
1. Operator Select. The program displays the job directory and prompts
you for the job to run.
2. Download Profile. The program automatically downloads the speci-
fied profile.
3. Upload Profile. The program automatically uploads the specified
profile.
When you choose Download Profile or Upload Profile, you will be
asked for a job’s name. This can be either a specific job or the last job
running when ANASCAN was terminated.
Normal start up action
This is the start up action when the program starts up normally.
Power failure recovery
When the program starts up following a power failure, it determines the
time between the power failure and the start up. If the time is less than
the power failure recovery time limit, the program takes the under limit
start up action. If the time is greater than the power failure recovery time
limit, the program takes the over limit start up action. The time limit is
entered in hours and minutes.