Watlow ANASCAN - Manual (Page 44)

36 ANASCAN User’s Guide
SYSTEM SETUP
• The passwords are all set to “PASSWORD” when ANASCAN is
shipped. Change the password status and password before running
a process.
NOTE
Passwords are not required for ANASCAN to function. However,
we recommend that you protect critical screens.
System Parameters
This window allows you to edit various system parameters as described
below.
Video control
• High Intensity. Set to either True or False. For most systems con-
taining a CGA monitor or better (as Watlow Anafaze recommends),
set to True. For some LCD or monochrome displays the cursor
display and prompt display may not appear correctly. In this case,
set to False.
• Video Access. Set to either Direct access or BIOS access. Direct
access allows fast screen displays but produces “snow” on some
CGA video systems. BIOS access prevents “snow” but is slower.
Alarm display screen
• Auto Switch. Set to On or Off. When on, the screen automatically
switches to the View Alarms screen whenever a new alarm condi-
tion occurs (latched alarms and thermocouple breaks only). This
calls maximum attention to an alarm, and Watlow Anafaze recom-
mends automatic switching for normal operation. When setting up a