Proface GP4100 - 3.4 Compact HMIs" User Manual
Page 54
Chapter 4 Installation and Wiring
4-9
(4)
Use a flat-blade screwdriver to tighten the appropriate terminal screws on the terminal connec-
tor from step 3.
• Use a flat-blade screwdriver (Size 0.4 x 2.5) to tighten the terminal screws.
The torque required to tighten these screws is 0.28N
•m (2.5 [Lb•in]).
• The power connector cannot be removed because it is mounted to GP unit. Do not
attempt to remove or tamper with the power connector. It may damage the power
connector.
• Be sure to loosen the terminal screws before pulling out the power cord. The power
connector may be damaged by pulling the power cord when attached to the power
connector.
• Do not solder the cable connection. Doing so may damage the unit due to abnormal
heat or cause a fire.
•
Be sure to twist the power cords together, up to the power connector.
- GP4200 - 3.5 Standard HMIs" (2 pages)
- GP4400 - 7.0 W Model HMI" (240 pages)
- GP4400 - 7.0 W Model HMI" (36 pages)
- GP4400 - 7.0 W Model HMI" (48 pages)
- GP4400 - 7.0 W Model HMI" (7 pages)
- GP4400 - 7.0 W Model HMI" (4 pages)
- GP4400 - 7.0 W Model HMI" (3 pages)
- GP4400 - 7.0 W Model HMI" (8 pages)
- GP4400 - 7.0 W Model HMI" (1 page)
- GP4400 - 7.0 W Model HMI" (5 pages)
- GP4600R - 12.1 Standard HMIs with Rear Mounting Options" (2 pages)
- AGP3200 - 3.8 Standard HMI" (8 pages)
- LT3200 - 3.8 All-in-One HMI" (16 pages)
- LT3200 - 3.8 All-in-One HMI" (1 page)
- LT3200 - 3.8 All-in-One HMI" (15 pages)
- LT3300 - 5.7 All-in-One HMI" (1 page)
- LT3300 - 5.7 All-in-One HMI" (2 pages)
- LT3200 - 3.8 All-in-One HMI" (93 pages)
- GP4300 - 5.7 Standard HMI" (2 pages)
- GP4400 - 7.5 Standard HMI" (2 pages)
- GP4500 - 10.4 Standard HMIs" (2 pages)
- GP4600 - 12.1 Standard HMIs" (2 pages)
- GP4500R - 10.4 Standard HMIs with Rear Mounting Options" (2 pages)
- AGP3200 - 3.8 Standard HMI" (53 pages)
- AGP3200 - 3.8 Standard HMI" (16 pages)
- AGP3200 - 3.8 Standard HMI" (37 pages)
- AGP3200 - 3.8 Standard HMI" (8 pages)
- LT3200 - 3.8 All-in-One HMI" (4 pages)
- LT3200 - 3.8 All-in-One HMI" (2 pages)
- GP4400R - 7.5 Standard HMI with Rear Mounting Options" (2 pages)
- GP4300R - 5.7 Standard HMI with Rear Mount" (2 pages)
- GP4200M - 3.5 Modular HMI" (2 pages)
- AGP3200 - 3.8 Standard HMI" (57 pages)
- AGP3200 - 3.8 Standard HMI" (12 pages)
- AGP3200 - 3.8 Standard HMI" (105 pages)
- AGP3200 - 3.8 Standard HMI" (16 pages)
- AGP3200 - 3.8 Standard HMI" (8 pages)
- AGP3200 - 3.8 Standard HMI" (6 pages)
- AGP3200 - 3.8 Standard HMI" (11 pages)
- AGP3200 - 3.8 Standard HMI" (10 pages)
- AGP3200 - 3.8 Standard HMI" (4 pages)
- AGP3200 - 3.8 Standard HMI" (236 pages)
- AGP3200 - 3.8 Standard HMI" (43 pages)
- AGP3200 - 3.8 Standard HMI" (39 pages)
- AGP3200 - 3.8 Standard HMI" (11 pages)