IEI Integration AFL2-W15A-N270 v2.00 - Manual (Page 52)

AFL2-W15A-N270 Panel PC
Page 40
2.10 Power Connection
The power cable connects the panel PC to the power supply. The power cable is required
for operation of the panel PC.
Step 1: Connect one end to the panel PC.
Step 2: Connect the other end to the included power supply Step 0:
2.11 Driver Installation
NOTE:
The content of the CD may vary throughout the life cycle of the product
and is subject to change without prior notice. Visit the IEI website or
contact technical support for the latest updates.
The following drivers can be installed on the system. Each driver is in its own directory on
the driver CD:
Chipset driver
Graphics driver
LAN driver
Audio driver
Touchscreen driver
Keypad utility driver
Wireless LAN card driver
NOTE:
There two kinds of touchscreen driver in the driver CD. Please follow
the guideline below to install the correct driver for the system:
Multi Touch for the AFL2-W15A-N270/PC/1G-R20
Single Touch for the AFL2-W15A-N270/R/1G-R20