IEI Integration AFL2-W15A-N270 v2.00 - Manual (Page 40)

AFL2-W15A-N270 Panel PC
Page 28
2.8 Mounting the System
WARNING!
The panel PC is very heavy. Two or more people should mount the
panel PC. Dropping or bumping the panel PC during installation can
cause serious or irreparable damage to the panel PC.
The following installation options are available:
Arm mounting
Panel mounting
Stand mounting
Wall mounting
The installation instructions are included with the stand, arm or mount.
2.8.1 Arm Mounting
The AFL2-W15A-N270 is VESA (Video Electronics Standards Association) compliant and
can be mounted on an arm with a 100 mm interface pad. To mount the AFL2-W15A-N270
on an arm, please follow the steps below.
Step 1: The arm is a separately purchased item. Please correctly mount the arm onto
the surface it uses as a base. To do this, refer to the installation documentation
that came with the mounting arm.
NOTE:
When purchasing the arm please ensure that it is VESA compliant and
that the arm has a 100 mm interface pad. If the mounting arm is not
VESA compliant it cannot be used to support the AFL2-W15A-N270.