2 internal aluminum cover removal, Figure 5-1: back cover retention screws – IEI Integration AFL-08AH-N270 User Manual

Page 55

AFL-08AH-N270-CR Panel PC

Page 41

To access the AFL-08AH-N270-CR internally the back cover must be removed. To remove

the back cover, please follow the steps below.

Step 1:

Follow all anti-static procedures

. See Section 5.2.

Step 2:

Turn off the power

. See Section 5.3.

Step 3:

Remove the retention screws on the back

. Remove the retention screws

(Figure 5-1) from the back cover.

Figure 5-1: Back Cover Retention Screws

Step 4:

Lift the cover off the system.

Step 0:

5.4.2 Internal Aluminum Cover Removal

To remove the internal aluminum cover, follow the steps below.

Step 1:

Remove the retention screws securing the internal aluminum cover (Figure 5-2).