Figure 4-9: the rack/cabinet bracket – IEI Integration AFL-08AH-N270 User Manual

Page 47

AFL-08AH-N270-CR Panel PC

Page 33

NOTE:

When purchasing the cabinet/rack installation bracket, make sure it is

compatible with both the AFL-08AH-N270-CR flat panel PC and the

rack/cabinet into which the AFL-08AH-N270-CR is installed.

Step 1:

Slide the rear chassis of the AFL-08AH-N270-CR flat panel PC through the

rack/cabinet bracket until the aluminum frame is flush against the front of the

Figure 4-9: The Rack/Cabinet Bracket

Step 2:

Insert the rack mounting clamps into the pre-formed holes along the edges of

the flat panel PC, behind the ABS/PC plastic frame. There are a total of 4 rack

mounting clamps.

Step 3:

Tighten the screws that pass through the rack mounting clamps until the plastic

caps at the front of all the screws are firmly secured to the bracket (Figure 4-10).