8 bottom panel connectors, 1 lan connection, Ottom – IEI Integration AFL-08AH-N270 User Manual

Page 49: Anel, Onnectors, Figure 4-12: lan connection

AFL-08AH-N270-CR Panel PC

Page 35

Step 5:

Once the flat panel PC with the attached rack/cabinet bracket has been properly

inserted into the rack or cabinet, secure the front of the rack/cabinet bracket to

the front of the rack or cabinet (Figure 4-11).

4.8 Bottom Panel Connectors

4.8.1 LAN Connection

There are two external RJ-45 LAN connectors. The RJ-45 connector enables connection

to an external network. To connect a LAN cable with an RJ-45 connector, please follow

the instructions below.

Step 1:

Locate the RJ-45 connectors

on the bottom panel of the AFL-08AH-N270-CR.

Step 2:

Align the connectors.

Align the RJ-45 connector on the LAN cable with one of

the RJ-45 connectors on the bottom panel of the AFL-08AH-N270-CR. See

Figure 4-12: LAN Connection

Step 3:

Insert the LAN cable RJ-45 connector.

Once aligned, gently insert the LAN

cable RJ-45 connector into the onboard RJ-45 connector.

Step 0: