IEI Integration AFL-08AH-N270 - Manual (Page 103)

AFL-08AH-N270-CR Panel PC
Page 89
B.1.2 Explanation of Graphical Symbols
This symbol warns the user that uninsulated voltage within the unit may have
sufficient magnitude to cause electric shock. Therefore, it is dangerous to
make any kind of contact with any part inside this unit.
This symbol alerts the user that important information concerning the operation
and maintenance of this unit has been included. Therefore, the information
should be read carefully in order to avoid any problems.
ISO 7000-1641: Follow operating instructions or consult instructions for use.
B.1.3 Classification
Power by Class I power adapter.
No Applied Part.
No protection against the ingress of water: IPX0
Mode of operation: Continuous Operation
The equipment not suitable for use in the presence of a flammable anesthetic
mixture with air or with oxygen or nitrous oxide: Not AP or APG Category.
B.1.4 Anti-static Precautions
WARNING:
Failure to take ESD precautions during the installation of the
AFL-08AH-N270-CR may result in permanent damage to the
AFL-08AH-N270-CR and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the AFL-08AH-N270-CR. Dry climates are especially susceptible to ESD. It is
therefore critical that whenever the AFL-08AH-N270-CR is opened and any of the
electrical components are handled, the following anti-static precautions are strictly
adhered to.