IEI Integration ECN-360A-D2550 - Manual (Page 32)

ECN-360A-D2550 Em b e d d e d S ys te m
P a g e 21
Figure 3-9: USB Device Connection
S te p 3: Insert the device connector. Once aligned, gently insert the USB device
connector into the onboard connector.
3.6.5 VGA Mo n ito r Co n n e c tio n
The ECN-360A-D2550 has two female DB-15 connectors on the external peripheral
interface panel. The DB-15 connector is connected to a CRT or VGA monitor. To connect
a monitor to the ECN-360A-D2550, please follow the instructions below.
S te p 1: Locate the female DB-15 connector. The location of the female DB-15
connector is shown in Chapter 1.
S te p 2: Align the VGA connector. Align the male DB-15 connector on the VGA screen
cable with the female DB-15 connector on the external peripheral interface.
S te p 3: Insert the VGA connector. Once the connectors are properly aligned with the
insert the male connector from the VGA screen into the female connector on the
ECN-360A-D2550. See Figure 3-11.