IEI Integration ECN-360A-D2550 - Manual (Page 29)

ECN-360A-D2550 Em b e d d e d S ys te m
P a g e 18
S te p 2: Plug the audio plug into the audio jack. Plug the audio plug into the audio
jack. If the plug on your speakers is different, an adapter will need to be used to
plug them into the audio jack. The audio jack on the ECN-360A-D2550 is a
line-out port which connects to a headphone or a speaker.
Figure 3-6: Audio Connector
S te p 3: Check audio clarity. Check that the sound is coming through the right speakers
by adjusting the balance front to rear and left to right.
3.6.2 LAN Co n n e c tio n
There are two external RJ-45 LAN connectors. The RJ-45 connector enables connection
to an external network. To connect a LAN cable with an RJ-45 connector, please follow
the instructions below.
S te p 1: Locate the RJ-45 connectors. The location of the LAN connector is shown in
Chapter 1.
S te p 2: Align the connectors. Align the RJ-45 connector on the LAN cable with one of
the RJ-45 connectors on the ECN-360A-D2550. See Figure 3-7.