IEI Integration IMBA-H610 User Manual
Page 107
IMBA-H610 ATX Motherboard
Page 92
Î Stop Bits [1]
Use the Stop Bits option to specify the number of stop bits used to indicate the end of a
serial data packet. Communication with slow devices may require more than 1 stop bit.
Î
1 D
EFAULT
Sets the number of stop bits at 1.
Î
2 Sets the number of stop bits at 2.
Î Flow Control [None]
Use the Flow Control option to report the flow control method for the console redirection
application.
Î
None D
EFAULT
No control flow.
Î
Hardware
RTS/CTS
Hardware is set as the console redirection.
Î VT-UTF8 Combo Key Support [Enabled]
Use the VT-UFT8 Combo Key Support option to enable additional keys that are not
provided by VT100 for the PC 101 keyboard.
The VT100 Terminal Definition is the standard convention used to configure and conduct
emergency management tasks with UNIX-based servers. VT100 does not support all keys
on the standard PC 101-key layout, however. The VT-UTF8 convention makes available
additional keys that are not provided by VT100 for the PC 101 keyboard.
Î
Disabled
Disables the VT-UTF8 terminal keys.
Î
Enabled D
EFAULT
Enables the VT-UTF8 combination key. Support for
ANSI/VT100 terminals.
Î Recorder Mode [Disabled]
Use the Recorder Mode option to enable or disable the recorder mode.
Î
Disabled D
EFAULT
Disables the recorder mode.