IEI Integration KINO-9652 v1.00 - Manual (Page 107)

KINO-9652 Mini-ITX SBC
Page 85
5.4.4 LVDS Voltage Selection
WARNING:
Permanent damage to the screen and KINO-9652 may occur if the
wrong voltage is selected with this jumper. Please refer to the user
guide that cam with the monitor to select the correct voltage.
Jumper Label: J_VLVDS1
Jumper Type: 3-pin header
Jumper Settings: See Table 5-6
Jumper Location: See Figure 5-11
The LVDS Voltage Selection jumper allows the LVDS screen voltage to be set. The
LVDS Voltage Selection jumper settings are shown in Table 5-6.
LVDS Voltage Select Description
Short 1-2 +3V Default
Short 2-3 +5V
Table 5-6: LVDS Voltage Selection Jumper Settings
The LVDS Voltage Selection jumper location is shown in Figure 5-11.