Vanguard EZCT-2000C Plus - Manual (Page 92)

EZCT-2000C USER’S MANUAL REV 1
88
3.5.10. Unloading a Test Plan from the Working Memory
To unload the test plan from the working memory and clear all the test plan parameters:
a. Start from the “START-UP” menu:
Press the
[3]
key (TEST PLANS).
b. The following screen will be displayed:
Press the [2] key (UNLOAD TEST PLAN).
c. The following screen will be displayed:
Press any key to return to the “START-UP” menu.
TEST PLAN UNLOADED!
1. load test plan
2. unload test plan
3. plan directory
4. extract test plan
5. print test plan
6. erase test plan
7. copy to thumb drive
1. RUN TEST 04/19/13
2. SETUP 11:13:15
3. TEST PLANS
4. DIAGNOSTICS
5. CURRENT SOURCE