Vanguard EZCT-2000C Plus User Manual

Page 53

REV 1 EZCT-2000C USER’S MANUAL

e. The following screen will be displayed:

Type the record number that you would like to restore and press the

[ENTER]

key. If

you do not know the record number, you can print a test record directory. Please see
section 3.4.5 for details.

f. The following screen will be displayed while the record is being restored:

The following screen will be displayed once the test record has been restored:

If you do not want to print the test record, press the

[2]

key (NO). The test record will

be restored to the working memory, and you will be returned to the “START-UP” menu.

If you would like to print the test record, press the

[1]

key (YES). Continue to step g.

g. The following screen will be displayed:

Press the

[1]

key to print the full tabulated data and graphics results on the thermal

printer. After printing is finished, you will be returned to the “START-UP” menu.

Press the

[2]

key to print the test report and graphic results on the thermal printer,

without the excitation voltage and current data points. After printing has finished, you
will be returned to the “START-UP” menu.

PRINT OPTIONS:

1. FULL DATA
2. ABBREVIATED data

RECORd_001 RESTORED!
PRINT RECORD?
1. YES
2. NO

restoring thumb drive

REC_001

PLEASE WAIT...

RESTORE THUMB DRIVE

REC_