Vanguard EZCT-2000C Plus - Manual (Page 101)

REV 1 EZCT-2000C USER’S MANUAL
97
4.4 Setting the Preferred Interface Language
Follow the steps below to set the preferred language for the EZCT-2000C's interface (English,
Spanish, and Turkish are supported):
a. Start from the "START-UP" menu:
Press the
[2]
key (SETUP).
b. The following screen will be displayed:
Press the [6] key (NEXT PAGE).
c. The following screen will be displayed:
Press the [2] key (SET LANGUAGE).
d. The following screen will be displayed:
Select the preferred language by pressing the corresponding number on the keypad.
1. ENGLISH
2. TURKISH
3. SPANISH
1. SET TIME
2. SET LANGUAGE
3. BURIED CT IN DELTA
4. KNEE POINT MARKER
5. PRINT RAW DATA
6. DISABLE H-VTG CHECK
1. RECORD ID
2. PRINT RECORD
3. RECORD DIRECTORY
4. SAVE/RESTORE RECORD
5. ERASE RECORD
6. NEXT PAGE
1. RUN TEST 05/02/13
2. SETUP 14:14:25
3. TEST PLANS
4. DIAGNOSTICS
5. CURRENT SOURCE