Vanguard EZCT-2000C Plus - Manual (Page 22)

EZCT-2000C USER’S MANUAL REV 1
18
3.3 Performing Tests
3.3.1. Entering Test Record Header Information
You can enter the test record header information before performing tests. The record header
includes identifying information such as the company, station, circuit, model number, etc. Once
the header information has been entered, it will apply to all subsequent test records. To enter
the header information:
a. When the unit is turned on and the firmware has been loaded, you will be presented
with the “START-UP” menu as shown below:
Press the [2] key (SETUP).
b. The following screen will be displayed:
Press the [1] key (RECORD ID)
c. The following screen will be displayed:
Type the company name using the keypad and then press the
[ENTER]
key.
COMPANY:
vanguard
↑↓
TO POSITION
"enter" to accept
1. RECORD ID
2. PRINT RECORD
3. RECORD DIRECTORY
4. SAVE/RESTORE RECORD
5. ERASE RECORD
6. NEXT PAGE
1. RUN TEST 04/15/13
2. SETUP 10:15:35
3. TEST PLANS
4. DIAGNOSTICS
5. CURRENT SOURCE