Vanguard EZCT-2000C Plus - Manual (Page 72)

EZCT-2000C USER’S MANUAL REV 1
68
3.5.2. Printing a Directory of Test Plans Stored in the EZCT-2000C’s Memory
You can print a directory of all the test plans stored in the EZCT-2000C’s Flash EEPROM using
the steps below:
a. Start from the “START-UP” menu:
Press the
[3]
key (TEST PLANS).
b. The following screen will be displayed:
Press the
[3]
key (PLAN DIRECTORY).
c. The following screen will be displayed while the test plan directory is printed on the
thermal printer:
NOTE
The above screen will be displayed only if a USB Flash drive is NOT connected
to the EZCT-2000C’s USB Flash drive port. If a USB Flash drive is connected,
the following screen will be displayed:
Press the [1] key (INTERNAL DIRECTORY). Continue with the steps below:
1. INTERNAL DIRECTORY
2. THUMB DRIVE DIR
PRINTING DIRECTORY
1. load test plan
2. unload test plan
3. plan directory
4. extract test plan
5. print test plan
6. erase test plan
7. copy to thumb drive
1. RUN TEST 04/18/13
2. SETUP 15:17:19
3. TEST PLANS
4. DIAGNOSTICS
5. CURRENT SOURCE