Vanguard EZCT-2000C Plus - Manual (Page 54)

EZCT-2000C USER’S MANUAL REV 1
50
3.4.3. Printing a Restored Test Record
You can print a test record at the time that it is restored from the Flash EEPROM or a USB Flash
drive (see section 3.4.1), or you can restore it to the working memory and print it later. To print
the current test record in the working memory:
a. Start from the “START-UP” menu:
Press the [2] key (SETUP).
b. The following screen will be displayed:
Press the [2] key (PRINT RECORD).
c. The following screen will be displayed:
NOTE
If there is no test record in the working memory, the following screen will be
displayed:
Press any key to return to the “START-UP” menu. Please see section 3.4.1 for
instructions on how to restore a test record.
NO SHOTS TO PRINT!
PRINT OPTIONS:
1. FULL DATA
2. ABBREVIATED data
1. RECORD ID
2. PRINT RECORD
3. RECORD DIRECTORY
4. SAVE/RESTORE RECORD
5. ERASE RECORD
6. NEXT PAGE
1. RUN TEST 04/17/13
2. SETUP 10:14:25
3. TEST PLANS
4. DIAGNOSTICS
5. CURRENT SOURCE