Teledyne LeCroy HDO6000 Operators Manual - Manual (Page 31)

Operator's Manual
Zooming Waveforms
The Zoom function magnifies a selected region of a trace. On HDO6000 model oscilloscopes, you can
display up to eight zoom traces (Z1 - Z8) taken from any channel, math, or memory trace.
You can also use the Multi-Zoom Math function to create time-locked zoom traces for selected
waveforms. For more information, refer to
Multi-Zoom ).
Create Zoom
To create a zoom, touch -and-drag to draw a selection box around any part of the source waveform.
Selected portion of trace.
The zoom will resize the selected portion to fit the full width of the grid. The degree of vertical and
horizontal magnification, therefore, depends on the size of the rectangle that you draw.
The zoom opens in a new grid, or the next empty grid, with the zoomed portion of the source trace
highlighted. If there are no more available grids, zooms will open in the same grid as the source trace.
Zoomed area of original trace highlighted.
922499 Rev B 23