Teledyne LeCroy HDO6000 Operators Manual - Manual (Page 119)

Operator's Manual
S AVE S ETUP T O F ILE
1. Touch Save Panel to File and enter the full path to the file, or touch Browse to navigate to the file
folder.
2. Enter a filename, or choose a existing file to overwrite.
3. Touch Save Now!
Recalling Oscilloscope Setups
Access the Recall Setup... dialog by either selecting File → Recall Setup... from the menu bar or clicking
the Recall Instrument Setup button on the main Save/Recall dialog.
R ECALL S ETUP F ROM M EMORY
Touch one of the six Recall buttons under Recall From Internal Setup....
NOTE: If a setup has been stored to a location, it is labeled with the name and save date/time. Otherwise,
the slot is labeled Empty.
R ECALL S ETUP F ROM F ILE
1. Touch Recall panel from file and provide the path to the destination file, or touch Browse to navigate
to the file.
2. Touch Recall Now!
Save/Recall Waveforms
Save Waveform
The Save Waveform dialog is used to save traces to either an internal memory location, or to a text or
binary format file. The source waveform can be any trace; for example, a channel, math function, or a
waveform stored in memory.
Access the Save Waveform dialog by either selectingFile → Save Waveform from the menu bar or
clicking the Save Waveform button on the main Save/Recall dialog.
NOTE: This dialog is for saving waveforms. Save S-parameter files, using the Result Actions Dialog.
922499 Rev B 111