Teledyne LeCroy HDO6000 Operators Manual - Manual (Page 25)

Operator's Manual
Print Screen
Print captures an image of the display and outputs it according to your Hardcopy settings , which may be
to send it to a network printer, e-mail it, save it to a file, or copy it to the clip-board to paste into another
application.
There are three ways to print:
l
Touch the Front Panel Print button.
l
Choose File > Print.
l
Choose Utilities > Utilities Setup > Hardcopy tab and touch the Print button to the far right of the
dialog.
NOTE: The Front Panel Print button can be configured to capture the screen as a LabNotebook entry. In
this case, only the File and Utilities menu print options will function according to your Hardcopy setup.
Screen Saver
The screen saver is activated the same as on any Windows PC. Minimize the instrument display by
choosing File → Minimize from the menu bar. Then, open the Windows Control Panel and change
Appearance and Personalization settings.
Touch the oscilloscope icon at the bottom right of the desktop to restore the instrument display.
922499 Rev B 17