Figure 4-9, Ipv6 neighbor detection and neighbor cache – LevelOne GTL-2690 User Manual

Page 95

Text mode
Original mode

Setting the Switch’s IP Address (IP Version 6)

4-19

Web – Click System, IPv6 Configuration, IPv6 ND Neighbor. To configure the
Neighbor Detection protocol settings, select a VLAN interface, set the number of
attempts allowed for duplicate address detection, set the interval for neighbor
solicitation messages, and click Apply. To configure static neighbor entries, click
Add, fill in the IPv6 address, VLAN interface and hardware address. Then click Add.

Figure 4-9 IPv6 Neighbor Detection and Neighbor Cache