LevelOne GTL-2690 - Manual (Page 418)

File Management Commands
23-15
23
• File information is shown below:
Example
The following example shows how to display all file information:
whichboot
This command displays which files were booted when the system powered up.
Syntax
whichboot [unit]
unit - Stack unit. (Range: 1-8)
Default Setting
None
Command Mode
Privileged Exec
Table 23-6 File Directory Information
Column Heading Description
file name The name of the file.
file type File types: Boot-Rom, Operation Code, and Config file.
startup Shows if this file is used when the system is started.
size The length of the file in bytes.
Console#dir
File name File type Startup Size
(byte)
------------------------------------- -------------- ------- Unit1:
Unit1:
GTL-2690_DIAG_V1.1.0.1.BIX Boot-Rom Image Y
1595976
GTL-2690__V1.1.0.2.BIX Operation Code Y
4973264
Factory_Default_Config.cfg Config File N
455
startup1.cfg Config File Y
3653
--------------------------------------------------------------------------
Total free space: 58851328
Console#