LevelOne GTL-2690 - Manual (Page 563)

LLDP Commands
32-16
32
Example
show lldp info remote-device
This command shows LLDP global and interface-specific configuration settings for
remote devices attached to an LLDP-enabled port.
Syntax
show lldp info remote-device [detail interface]
• detail - Shows detailed information.
• interface
• ethernet unit/port
- unit - Stack unit. (Range: 1-8)
- port - Port number. (Range: 1-26)
• port-channel channel-id (Range: 1-32)
Command Mode
Privileged Exec
Console#show lldp info local-device
LLDP Local System Information
Chassis Type : MAC Address
Chassis ID : 00-01-02-03-04-05
System Name :
System Description: 20 GE + 4 GE Combo SFP + 2 10GE XFP Module slot L3
SNMP Stackable Switch
System Capabilities Support : Bridge, Router
System Capabilities Enable : Bridge, Router
Management Address : 192.168.0.2 (IPv4)
LLDP Port Information
Interface |PortID Type PortID PortDesc
--------- + ---------------- ----------------- ---------------------------
Eth 1/1 |MAC Address 00-01-02-03-04-06 Ethernet Port on unit 1, port 1
Eth 1/2 |MAC Address 00-01-02-03-04-07 Ethernet Port on unit 1, port 2
Eth 1/3 |MAC Address 00-01-02-03-04-08 Ethernet Port on unit 1, port 3
Eth 1/4 |MAC Address 00-01-02-03-04-09 Ethernet Port on unit 1, port 4
.
.
.
Console#show lldp info local-device detail ethernet 1/1
LLDP Port Information Detail
Port : Eth 1/1
Port Type : MAC Address
Port ID : 00-01-02-03-04-06
Port Desc : Ethernet Port on unit 1, port 1
Console#